Lifting bag BATTERY BAG 950 500Kg
SKU
BATTERY BAG 950
Quote only
- L950mm x W660mm x H300mm SWL 500kg
- Velcro Lid Closure
- External Tray
- 4 x Internal Compartment Trays @ L230mm x W640mm x H250mm
If you require any other extras, please contact us through our email.
Categories: Square Lifting Bags, Load Rated Lifting Bags, Lifting Bags
Battery Bag 950 is a special model designed to lift the batteries. It has 4 internal compartment trays and a standard external tray for base protection.
The Internal compartment trays are sized L230mm x W640mm x H250mm and are specially made to fit batteries sized L197mm x W597mm x H122mm. To keep the batteries in their own compartments, the added height prevents the batteries from topping over.
If different sizes of the bag or internal compartments are required, please get in touch with our sales team via email for further assistance regarding our bespoke-made service.
The images shown are for reference only.
As our bags are made to order, the pre-order status means we will process the order once the payment is received or the order is confirmed (for credit account holders).
The lead time for small orders is approximately 3-5 working days. Orders containing a higher quantity can take slightly longer. If the order is urgent, please inform the sales representative, and we will do our best to accommodate within the required timescale.
The Internal compartment trays are sized L230mm x W640mm x H250mm and are specially made to fit batteries sized L197mm x W597mm x H122mm. To keep the batteries in their own compartments, the added height prevents the batteries from topping over.
If different sizes of the bag or internal compartments are required, please get in touch with our sales team via email for further assistance regarding our bespoke-made service.
The images shown are for reference only.
As our bags are made to order, the pre-order status means we will process the order once the payment is received or the order is confirmed (for credit account holders).
The lead time for small orders is approximately 3-5 working days. Orders containing a higher quantity can take slightly longer. If the order is urgent, please inform the sales representative, and we will do our best to accommodate within the required timescale.
| Fabric | Single skin |
|---|---|
| Base protection | External Tray, Internal Tray |
| Bag type | Load Rated |
| Base Shape | Square |
| Closure | Velcro Lid |
| Length (mm) | 950 |
| Width (mm) | 660 |
| Height (mm) | 300 |
| Safe Working Load (KG) | 500 |
| Each Internal Compartment Size (mm) | 4 @ L230 x W640 x H250 |
| Additional features | A4 Clear Document Pocket |
| Handles | No Handles |
All of our lifting bags comply with the requirements of the Provision and Use of Work Equipment Regulations 1998 (PUWER). Our CE models have integrated sling systems which conforms with the standard EN-1492-1. For more information, please contact support@industrialliftingbags.co.uk
All materials used are sourced from trusted third party suppliers. Only materials of the highest quality are used in our products.
Fabric – All our bags are made with Super Strong 900 g/m2 PVC coated fabric with two-side lacquered. Often used as truck curtains, retention basins and anti-pollution barriers.
The PVC coating uses Lowick System which help considerably reduce micro-organism penetration into the heart of the coated fabric. In addition, the Cleangard® lacquer greatly increases durability and makes fabric All-weather resistant and easy to maintain.
This fabric has an extreme tensile strength of 400/400 DaN and can operate in -30°c to +70°c environments, perfect for lifting heavy loads in various conditions.
Webbing Sling – Strong Weave Polyester webbing is used for it’s very high strength tenacity, good chemical and abrasion resistance nature, it is also difficult to ignite and burns slowly. In addition, it has excellent UV protection and does not absorb water, giving it high resistance to rot and mildew. It has a breaking strength of up to 4.5 tonnes, along with elongation properties – lengthening up to 25% at breaking point.
D-rings – A4 grade Stainless Steel 50mm D-rings are used as lifting points. With 8mm diameter thickness, these d-rings are extremely strong. It was tested to destruction with a load of 7 tonnes. The D-rings we use in particular has the joint welded together making it almost impossible to see. This helps further improve strength and durability.
HDPE – All of our protective trays or reinforced flooring uses High Density Polyethylene Plastic. It has a high strength-to-density ratio, low friction, outstanding wear resistance, along with corrosion and abrasion resistance properties. HDPE stays strong whilst offering flexibility, reducing the risk of breakage.
Please contact us directly for a detail list of all materials used along with technical files.
All materials used are sourced from trusted third party suppliers. Only materials of the highest quality are used in our products.
Fabric – All our bags are made with Super Strong 900 g/m2 PVC coated fabric with two-side lacquered. Often used as truck curtains, retention basins and anti-pollution barriers.
The PVC coating uses Lowick System which help considerably reduce micro-organism penetration into the heart of the coated fabric. In addition, the Cleangard® lacquer greatly increases durability and makes fabric All-weather resistant and easy to maintain.
This fabric has an extreme tensile strength of 400/400 DaN and can operate in -30°c to +70°c environments, perfect for lifting heavy loads in various conditions.
Webbing Sling – Strong Weave Polyester webbing is used for it’s very high strength tenacity, good chemical and abrasion resistance nature, it is also difficult to ignite and burns slowly. In addition, it has excellent UV protection and does not absorb water, giving it high resistance to rot and mildew. It has a breaking strength of up to 4.5 tonnes, along with elongation properties – lengthening up to 25% at breaking point.
D-rings – A4 grade Stainless Steel 50mm D-rings are used as lifting points. With 8mm diameter thickness, these d-rings are extremely strong. It was tested to destruction with a load of 7 tonnes. The D-rings we use in particular has the joint welded together making it almost impossible to see. This helps further improve strength and durability.
HDPE – All of our protective trays or reinforced flooring uses High Density Polyethylene Plastic. It has a high strength-to-density ratio, low friction, outstanding wear resistance, along with corrosion and abrasion resistance properties. HDPE stays strong whilst offering flexibility, reducing the risk of breakage.
Please contact us directly for a detail list of all materials used along with technical files.
Sign In